The enamel can be applied onto any type of solvent and water-based old coating. It is non-yellowing, easy to apply and with good covering power.
WHERE TO APPLY: wooden items (balconies, cladding, beams, cottages, fences). Iron items (railings, fences and gates).
HOW TO APPLY: by brush/spray.
ON NEW WOOD: apply a basestain of the HI 20** as a basecoat, apply 2 coats of enamel by brush or spray (thinned 10% to 20% with tap water) leaving 4 hours between each coat, without sanding. If you wait more then 12 hours you have to sand it.
ON PREVIOUSLY COATED WOOD: if the enamel is in good condition, lightly sand using 320 grit sandpaper, then apply the enamel.
ON PREVIOUSLY PRIMED METAL: apply 2 coats of enamel, waiting at least 4 hours between each coat.
ON PREVIOUSLY COATED METAL: remove any dust and grease, sand using 280 grit sandpaper. Apply 2 coats of enamel on the old coating, waiting at least 4 hours between each coating.
Package: 0,75 L – 2,5 L – Cans – Before ordering the product, please check availability with your sales representative.
Touch dry: 6 hours
Interval between coats: 12 hours
Final dry: 24 hours
750 ml = 9 mq
synthetic bristle brush/spray