PAINTING of TRACKS/PATHS for SKATE-BOARDS

—

in

Procedure for PAINTING amateur runs

I° PHASE: Waterbased wood stain

It is important to prepare the raw product for painting and sand it with suitable abrasive paper 120 – 150. After that, on well prepared wood, clean and dry apply a first coat of waterbased wwod stain clear HI 2010, certified Ecolabel.

Let it dry for about 4-6 hours.

II° PHASE: Top Deck waterbased TOPCOAT

On dried wood stain apply a first coat of Top Deck waterbased Topcoat HD2000, certified Ecolabel, dilute with water as necessary. After drying about 8 hours, sand with 280 sandpaper and apply a second coat of Top Deck HD 2000.
Given the particular and severe use it is recommended to carry out with the same product a periodic maintenance related to wear.